Extang Trifecta 2.0 Problems (Find Out The Solution)

Last Updated on
Photo of author
Written By Waylon Joe

Hey, It’s Waylon “Joe” Kite here. I am a West Virginia native and a die-hard pickup truck fan. My story with trucks started with my dad’s 1989 Ford F-150, and it's still going on. I'll share all my trucking experiences (both great and gross ones) with you. I have a garage full of tools to fix and renovate trucks and a freezer full of ales. Do you want to join me?

Extang Trifecta 2.0 tonneau cover has recently received a lot of attention from truck owners due to its convenience and smart features.

If you only go with the hype instead of enough research, your decision can go wrong. Following, we have described a short overview and broadly mentioned the extang Trifecta 2.0 problems. 

Extang Trifecta 2.0 Problems

Combining these, you’ll get complete information to set your expectations accordingly and will prepare you to use this truck bed cover properly.

Extang Trifecta 2.0 Soft Folding Tonneau Cover

With a combination of sleek design, stronger protection, and smarter operation, this Extang Trifecta 2.0 Soft Folding Tonneau Cover will give you peace of mind every time you use it.

Unlike the typical light-duty tonneau cover, this extang trifecta 2.0 is built to deflect water, guard against the elements and avoid fading. 

This soft-folding tonneau cover won’t flutter on the highway while ensuring a smoother and low-profile appearance.

It is also an e-adhesive and remains in place to ensure ultimate weather protection, while its smart lock system ensures smooth operation with minimal effort. 

Plus, this soft-folding tonneau comes fully assembled and requires around 5 minutes to install. It also offers a lifetime warranty. Overall, this extang Trifecta 2.0 is the best soft folding tonneau cover you will ever find.

Read also: Truxedo Pro X15 Vs Lo Pro (2022 New Comparison)

Extang Trifecta 2.0 Problems

Bracket issues

One of the highlights of this Extang trifecta 2.0 truck bed cover is the most convenient installation process., some users still face a bit of a problem during installation.

One complains that the clamp straps of this tonneau interfere with the brackets before tightening down. 

It prevents him from completing the installation successfully. It can happen if you try to install this tonneau on an incompatible truck bed, as the reporter does in his 2013 Tacoma. The potential source of this problem is the sliding problem of the T handle. 

The T handle should slide as far to the outside of the channel as possible. This lets the outermost lip catch the bracket and tighten down successfully.

In this case, you can ask for help from the extang trifecta customer care and they will fix the problem without causing any further issues.

>> UnderCover Armor Flex Problems (Main Causes & Fixes)

EZ Lock clamp not locking

The EZ-Lock clamp lock is the smart function that comes with this soft-folding tonneau cover. It locks the tonneau in place automatically, so the operator requires minimal effort to operate the tonneau. The EZ-Lock clamps are placed at the tailgate, which also adds security. 

But unfortunately, one user experienced that this EZ clamp doesn’t lock the cover to the bed. He explains that this spring-loaded clamp doesn’t have enough tension to keep the cover down on the bed rails. 

It may occur as a result of incorrect operation rather than a clamp fault. Lock the cover to the bed cover, you must pull the EZ lock clamp straight down and then release it to hook underneath the bottom of the rail.

If you are experiencing the same problem, check the clamp lock installation process in the user manual that comes with the tonneau.

Are Truck Bed Covers Interchangeable? (Complete Guide)

The cover isn’t compatible with the bed extender

Like other typical soft-folding tonneau covers, this Extang Trifecta 2.0 has some limitations as well. The top error side of this tonneau may not fit your tonneau cover if you have a bed extender installed on the tonneau cover. 

If you try to install this soft folding truck bed over the bed extender, the latching handles on the tonneau close to the tailgate won’t swing into the locking position and prevent it from installing. The reason is that the latching handle will hit the bed extender top rail.

>> Gator SR1 Vs Truxedo Truxport (Things You Should Know)

If you are still keen on installing the tonneau, here are some recommended methods with potential consequences:

Since the latching handle prevents the tonneau cover from sitting in place, you can cut the handle to complete the installation. But this can bring some difficulties too. If you cut the handle, then it won’t lock back into the tonneau when not in use.

Instead of cutting the handles, you can also remove the bed extender to properly place the tonneau. And then you can use the bed extender when the cover is off, or the tailgate is down, as well as lock or folds the cover back. But this will lower the security level.

The final recommendation is to make some modifications to the bed extender. You can remove the top rungs completely or remove a sufficient number of the plastic rungs on the top bar. This will let the handle swing in perfectly, and then you can finish the installation.

>> Extang Encore Problems And Easy Solutions

Read also: How To Fix Tonneau Cover Latch?

Seal Problem

Unlike the typical soft folding truck bed cover, this extang trifecta 2.0 is made of lightweight aircraft-grade aluminum and leather-grain fabric.

Combining these, this fade-resistant tonneau cover deflects water and protects against weather elements. Apart from that, the tonneau also has double-pivot MAX Hinges and exclusive snap-on seals to remove adhesive and hold the tonneau in place.

However, its sealing system gets some bad reviews. According to the customer, the seal on the tailgate doesn’t last long. Plus, some customers receive broken hinges too. 

Even though these are the main complaints about the Extang trifecta tonneau cover, you must still find a way to deal with it.

Simply contact Extang customer service and report the issue. You’ll receive two different types of seals and a nice hinge. Apply the seal on the defective area and you’ll never have the water issue again.

>> Truxedo Pro X15 Problems | Let’s Find Out Now!

Read also: Bakflip Mx4 Problems

Final words

The extang trifecta 2.0 problems we have listed above are reported by a minimal amount of customers. On Amazon, this tonneau cover gets a 4.6 rating out of 5, which means most of the customer gets positive experiences. 

The complainer can also avoid that problem if installing the tonneau properly and following the instructions. And this is where this guide will be handy for you.

Read Also: 5 Common Retrax Bed Cover Problems

Read also: Best Weather Stripping For Tonneau Cover

Save Upto 15% on Your Tonneau Cover Order!

As we know in this era tonneau cover is a must-have tool for every truck owner, that's why we came up with up to 15% discount for our readers on Amazon. If you click on the button below, we will take you to their exclusive discount page!